Merge tag 'upstream/1.2.3'

[quagga-debian.git] / pimd / DEBUG

diff --git a/pimd/DEBUG b/pimd/DEBUG
deleted file mode 100644 (file)
index 72fb826..0000000
--- a/pimd/DEBUG
+++ /dev/null
@@ -1,86 +0,0 @@
-# $QuaggaId: $Format:%an, %ai, %h$ $
-
-DEBUG HINTS
-
-  - Check the source is issuing multicast packets with TTL high enough
-    to reach the recipients.
-
-  - Check the multicast packets are not being dropped due to
-    fragmentation problems.
-
-  - Three easy options to test IGMPv3 joins from the receiver host:
-
-    1) Configure pimd on the receiver host with "ip igmp join":
-
-       interface eth0
-        ip pim ssm
-        ip igmp join 239.1.1.1 1.1.1.1 
-
-    2) Use test_igmpv3_join command-line utility (provided with qpimd):
-
-       test_igmpv3_join eth0 239.1.1.1 1.1.1.1
-
-    3) User the Stig Venaas' ssmping utility:
-
-       ssmping -I eth0 1.1.1.1
-
-       To see multicast responses with ssmping, you will need run on
-       the host 1.1.1.1 either:
-       a) Stig Venaas' ssmpingd command-line daemon
-          OR
-       b) qpimd built-in ssmpingd service:
-          conf t
-            ip ssmpingd 1.1.1.1
-
-  - Using nepim to generate multicast stream from 1.1.1.1 to 239.1.1.1:
-
-    Notices:
-
-    a) The host unicast address 1.1.1.1 must be reachable from the
-    receiver.
-
-    b) nepim tool requires the receiver must be started *before* the
-    sender.
-
-    First: Start a receiver for that stream by running:
-
-    nepim -q -6 -j 1.1.1.1+239.1.1.1@eth0
-    (Remember of enabling both "ip pim ssm" and "ip igmp" under eth0.)
-
-    Second: Start the sender at host 1.1.1.1.
-
-    The following command generates a 100-kbps multicast stream for
-    channel 1.1.1.1,239.1.1.1 with TTL 10 and 1000-byte payload per UDP
-    packet (to avoid fragmentation):
-
-    nepim -6 -M -b 1.1.1.1 -c 239.1.1.1 -T 10 -W 1000 -r 100k -a 1d
-
-
-
-SAMPLE DEBUG COMMANDS
-
-  conf t
-   int eth0
-    ip pim ssm
-
-  test pim receive hello eth0 192.168.0.2 600 10 111 1000 3000 0
-  test pim receive join eth0 600 192.168.0.1 192.168.0.2 239.1.1.1 1.1.1.1
-
-  show ip pim join                                                         
-
-
-INTEROPERABILITY WITH CISCO
-
-  ! Cisco IP Multicast command reference:
-  ! ftp://ftpeng.cisco.com/ipmulticast/Multicast-Commands
-  !
-  ip pim ssm default ! enable SSM mode for groups 232.0.0.0/8
-  ip multicast-routing
-  ip pim state-refresh disable
-  no ip pim dm-fallback
-  !
-  interface FastEthernet0
-   ip pim sparse-mode
-   ip igmp version 3
-
--x-