Summary of CLI commands, expanded for Opaque-LSA/MPLS-TE.
---------------------------------------------------------

router>

  show ip ospf database (asbr-summary|external|max-age|network|router|self-originate|summary|opaque-link|opaque-area|opaque-external)

  show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) (self-originate|)

  show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D

  show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D (self-originate|)

  show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) A.B.C.D adv-router A.B.C.D

  show ip ospf database (asbr-summary|external|network|router|summary|opaque-link|opaque-area|opaque-external) adv-router A.B.C.D

  --> Add database items: opaque-link, opaque-area, opaque-external

  show mpls-te interface [INTERFACE]

  --> Show current MPLS-TE link-TLV parameters.
      If [INTERFACE] is omitted, all interfaces will be displayed.

  show mpls-te router

  --> Show current MPLS-TE Router-TLV parameters.

router> enable
router#
router# configure terminal
router(config)# interface [INTERFACE]
router(config-if)#

  mpls-te link max-bw BANDWIDTH

  --> Set MPLS-TE link-TLV parameter: Maximum Bandwidth (Bytes/sec).
      In integer or floating point format (1000, or 1.0e3)

  mpls-te link max-rsv-bw BANDWIDTH

  --> Set MPLS-TE link-TLV parameter: Maximum Reservable Bandwidth (Bytes/sec).
      In integer or floating point format (1000, or 1.0e3)

  mpls-te link metric <0-4294967295>

  --> Set MPLS-TE link-TLV parameter: MPLS-TE metric.

  mpls-te link rsc-clsclr BITPATTERN

  --> Set MPLS-TE link-TLV parameter: Resource Class/Color.
      In 32-bit hexadecimal format, with leading "0x" (0x0 - 0xffffffff)

  mpls-te link unrsv-bw <0-7> BANDWIDTH

  --> Set MPLS-TE link-TLV parameter: Unreserved Bandwidth (Bytes/sec).
      In integer or floating point format (1000, or 1.0e3)

router(config-if)# exit
router(config)# router ospf
router(config-router)#

  mpls-te

  --> Enable MPLS-TE functionality.
      Note that master-switch "ospf opaque-lsa" must also be specified.

  mpls-te on

  --> Alias of "mpls-te" command.

  mpls-te router-address A.B.C.D

  --> Set MPLS-TE Router-TLV parameter: Router Address.

  no mpls-te

  --> Disable MPLS-TE functionality.

  no ospf opaque-lsa

  --> Disable Opaque-LSAs capability.
      This node behaves Opaque-incapable node.

  ospf opaque-lsa

  --> Enable Opaque-LSAs capability.
      This is the master-switch to make this node Opaque-capable.

router# exit